Rod / Line Sources
The products shown on these pages are representative sources used for common applications.
If you cannot find the product with your specifications, please contact us using the corresponding email contact on this website.
In most cases we will be able provide you with a solution meeting your requirements.
You can also use our product request forms.
Application:
These two line sources sets are designed for the use with IGOR and OLGA body phantoms for the calibration of a whole body counter.
Single nuclide sources with other activities and number of line sources are available on request.
Example:
Total activities for all sources: Ba-133: 50kBq, Cs-137: 30kBq, Co-60: 60kBq
Mixed Nuclide Gamma Reference Source Set 1 | ||||
Total activity: | 115 kBq | |||
Activity tolerance: | +/- 10% | |||
Consisting of 180 line sources: | each: | |||
Ba-133 with 227 Bq | ||||
Cs-137 with 136 Bq | ||||
Co-60 with 273 Bq | ||||
Total activity calibrated: | DAkkS certificate | |||
Estimated measurement uncertainty: | <= +/- 10% (k=2) | |||
Drawing: | VZ-3891-002 | |||
Density: | 1,1 g/cm³ | |||
Overall dimensions: | each ø 6mm x 163 mm | |||
Activity homogeneous in epoxy resin in an acrylic glass tube. |
Mixed Nuclide Gamma Reference Source Set 2 | ||||
Total activity: | 25,5 kBq | |||
Activity tolerance: | +/- 10% | |||
Consisting of 80 line sources: | each: | |||
Ba-133 with 114 Bq | ||||
Cs-137 with 68 Bq | ||||
Co-60 with 137 Bq | ||||
Total activity calibrated: | DAkkS certificate | |||
Estimated measurement uncertainty: | <= +/- 10% (k=2) | |||
Drawing: | VZ-3891-002 | |||
Density: | 1,1 g/cm³ | |||
Overall dimensions: | each ø 6mm x 163 mm | |||
Activity homogeneous in epoxy resin in an acrylic glass tube. |
EG type
Application:
These EG-line sources have been designed for the calibration of waste drum measurement systems.
Description:
Overall Dimensions: diameter 9,53mm x 813mm length; 0,89mm thick wall made from Aluminium.
Both ends of the tube are capped with 2mm end plugs, glued wth epoxy resin to give an active length of
809mm. The activity is uniformly dispersed in epoxy resin of 1.0g/cc density. All activities are calibrated,
traceable to the National Institute of Standards and Technologies (NIST) /USA.
ISO classification: ISO/12/C22212
Product Code | Isotopes | Activities | Total Activity |
EG-1830-LINE | Am-241 | 800kBq (2.16µCi) | 1,8MBq (48.65µCi) |
EG-1830-LINE-01 | Am-241 | 148kBq (4µCi) | 296kBq (8µCi) |
EG-1830-LINE-02 | Am-241 | 370kBq (10µCi) | 740kBq (20µCi) |
EG-1830-LINE-03 | Am-241 | 370kBq (10µCi) | 1,85MBq (50µCi) |
EG-1830-LINE-03-1 | Am-241 | 370kBq (10µCi) | 444kBq (12µCi) |
EG-1830-LINE-04 | Ba-133 | 277,5kBq (7.5µCi) | 555kBq (15µCi) |